Revert "surya: bring back stock camera provider"

This reverts commit 6e441296f2.

proprietary/vendor/etc/libnfc-nci.conf

@@ -0,0 +1,103 @@
+###################### Start of libnfc-common.conf #######################
+
+###############################################################################
+# Application options
+APPL_TRACE_LEVEL=0xFF
+PROTOCOL_TRACE_LEVEL=0xFFFFFFFF
+
+NFC_DEBUG_ENABLED=0x01
+
+###############################################################################
+# File used for NFA storage
+NFA_STORAGE="/data/nfc"
+
+###############################################################################
+# Force UICC to only listen to the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
+UICC_LISTEN_TECH_MASK=0x07
+
+###############################################################################
+# Configure the default Destination Gate used by HCI (the default is 4, which
+# is the ETSI loopback gate.
+NFA_HCI_DEFAULT_DEST_GATE=0xF0
+
+###############################################################################
+# Forcing HOST to listen for a selected protocol
+# 0x00 : Disable Host Listen
+# 0x01 : Enable Host to Listen (A)  for ISO-DEP tech A
+# 0x02 : Enable Host to Listen (B)  for ISO-DEP tech B
+# 0x04 : Enable Host to Listen (F)  for T3T Tag Type Protocol tech F
+# 0x07 : Enable Host to Listen (ABF)for ISO-DEP tech AB & T3T Tag Type Protocol tech F
+HOST_LISTEN_TECH_MASK=0x07
+
+###############################################################################
+# Enabling/Disabling Forward functionality
+# Disable           0x00
+# Enable            0x01
+NXP_FWD_FUNCTIONALITY_ENABLE=0x01
+
+###############################################################################
+# AID for Empty Select command
+# If specified, this AID will be substituted when an Empty SELECT command is
+# detected.  The first byte is the length of the AID.  Maximum length is 16.
+AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00}
+
+###############################################################################
+# When screen is turned off, specify the desired power state of the controller.
+# 0: power-off-sleep state; DEFAULT
+# 1: full-power state
+# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
+SCREEN_OFF_POWER_STATE=1
+
+###############################################################################
+# Default poll duration (in ms)
+#  The defualt is 500ms if not set (see nfc_target.h)
+#NFA_DM_DISC_DURATION_POLL=333
+
+###############################################################################
+# Force tag polling for the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
+#            NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
+#            NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO |
+#            NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE.
+#
+# Notable bits:
+# NFA_TECHNOLOGY_MASK_A             0x01    /* NFC Technology A             */
+# NFA_TECHNOLOGY_MASK_B             0x02    /* NFC Technology B             */
+# NFA_TECHNOLOGY_MASK_F             0x04    /* NFC Technology F             */
+# NFA_TECHNOLOGY_MASK_ISO15693	    0x08    /* Proprietary Technology       */
+# NFA_TECHNOLOGY_MASK_KOVIO	    0x20    /* Proprietary Technology       */
+# NFA_TECHNOLOGY_MASK_A_ACTIVE      0x40    /* NFC Technology A active mode */
+# NFA_TECHNOLOGY_MASK_F_ACTIVE      0x80    /* NFC Technology F active mode */
+#POLLING_TECH_MASK=0xEF
+POLLING_TECH_MASK=0xCF
+###############################################################################
+# Force P2P to only listen for the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
+#            NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE
+#
+# Notable bits:
+# NFA_TECHNOLOGY_MASK_A	            0x01    /* NFC Technology A             */
+# NFA_TECHNOLOGY_MASK_F	            0x04    /* NFC Technology F             */
+# NFA_TECHNOLOGY_MASK_A_ACTIVE      0x40    /* NFC Technology A active mode */
+# NFA_TECHNOLOGY_MASK_F_ACTIVE      0x80    /* NFC Technology F active mode */
+P2P_LISTEN_TECH_MASK=0xC5
+
+PRESERVE_STORAGE=0x01
+
+###############################################################################
+# Deactivate notification wait time out in seconds used in ETSI Reader mode
+# 0 - Infinite wait
+NFA_DM_DISC_NTF_TIMEOUT=0
+
+###############################################################################
+# AID_MATCHING constants
+# AID_MATCHING_EXACT_ONLY 0x00
+# AID_MATCHING_EXACT_OR_PREFIX 0x01
+# AID_MATCHING_PREFIX_ONLY 0x02
+AID_MATCHING_MODE=0x01
+
+###############################################################################

proprietary/vendor/etc/libnfc-nxp-pnscr.conf

@@ -0,0 +1,21 @@
+#################### This file is used by NXP NFC NCI HAL #####################
+###############################################################################
+# Application options
+# Logging Levels
+# NXPLOG_DEFAULT_LOGLEVEL    0x01
+# ANDROID_LOG_DEBUG          0x03
+# ANDROID_LOG_WARN           0x02
+# ANDROID_LOG_ERROR          0x01
+# ANDROID_LOG_SILENT         0x00
+NXPLOG_EXTNS_LOGLEVEL=0x03
+NXPLOG_NCIHAL_LOGLEVEL=0x03
+NXPLOG_NCIX_LOGLEVEL=0x03
+NXPLOG_NCIR_LOGLEVEL=0x03
+NXPLOG_FWDNLD_LOGLEVEL=0x03
+NXPLOG_TML_LOGLEVEL=0x03
+NFC_DEBUG_ENABLED=1
+
+###############################################################################
+# Nfc Device Node name
+NXP_NFC_DEV_NODE="/dev/nq-nci"
+

proprietary/vendor/etc/libnfc-nxp.conf

@@ -0,0 +1,533 @@
+## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn547)
+## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn547)
+###############################################################################
+# Application options
+# Logging Levels
+# NXPLOG_DEFAULT_LOGLEVEL    0x01
+# ANDROID_LOG_DEBUG          0x03
+# ANDROID_LOG_WARN           0x02
+# ANDROID_LOG_ERROR          0x01
+# ANDROID_LOG_SILENT         0x00
+NXPLOG_EXTNS_LOGLEVEL=0x03
+NXPLOG_NCIHAL_LOGLEVEL=0x03
+NXPLOG_NCIX_LOGLEVEL=0x03
+NXPLOG_NCIR_LOGLEVEL=0x03
+NXPLOG_FWDNLD_LOGLEVEL=0x03
+NXPLOG_TML_LOGLEVEL=0x03
+
+###############################################################################
+# Nfc Device Node name
+NXP_NFC_DEV_NODE="/dev/nq-nci"
+
+###############################################################################
+# Extension for Mifare reader enable
+MIFARE_READER_ENABLE=0x01
+
+###############################################################################
+# Vzw Feature enable
+VZW_FEATURE_ENABLE=0x01
+
+###############################################################################
+# File name for Firmware
+NXP_FW_NAME="libpn553_fw.so"
+
+###############################################################################
+# System clock source selection configuration
+#define CLK_SRC_XTAL       1
+#define CLK_SRC_PLL        2
+NXP_SYS_CLK_SRC_SEL=0x02
+
+###############################################################################
+# System clock frequency selection configuration
+#define CLK_FREQ_13MHZ         1
+#define CLK_FREQ_19_2MHZ       2
+#define CLK_FREQ_24MHZ         3
+#define CLK_FREQ_26MHZ         4
+#define CLK_FREQ_32MHZ         5
+#define CLK_FREQ_38_4MHZ       6
+#define CLK_FREQ_52MHZ         7
+NXP_SYS_CLK_FREQ_SEL=0x02
+
+###############################################################################
+# The timeout value to be used for clock request acknowledgment
+# min value = 0x01 to max = 0x06
+NXP_SYS_CLOCK_TO_CFG=0x01
+
+###############################################################################
+# NXP proprietary settings
+NXP_ACT_PROP_EXTN={2F, 02, 00}
+
+###############################################################################
+# NFC forum profile settings
+NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00}
+
+###############################################################################
+# Standby enable settings
+# Disable   = 0x00
+# Enable    = 0x01
+NXP_CORE_STANDBY={2F, 00, 01, 01}
+
+###############################################################################
+# NXP TVDD configurations settings
+# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported,
+# out of them only one can be configured at a time.
+NXP_EXT_TVDD_CFG=0x01
+
+###############################################################################
+#config1:SLALM, 3.3V for both RM and CM
+NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, 01, 31, 00, 00, 00, 21, 00, 10, 0C}
+
+###############################################################################
+#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM,
+#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms
+NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C}
+
+NXP_RF_CONF_BLK_1={
+        20, 02, E7, 1B,
+        A0, 0D, 06, 06, 37, 08, 76, 00, 00,
+        A0, 0D, 03, 24, 03, 7D,
+        A0, 0D, 06, 02, 35, 00, 3E, 00, 00, 
+        A0, 0D, 06, 04, 35, F4, 05, 70, 02, 
+        A0, 0D, 06, C2, 35, 00, 3E, 00, 03,
+        A0, 0D, 06, 04, 42, F8, 40, FF, FF, 
+        A0, 0D, 04, 32, 42, F8, 40,
+        A0, 0D, 04, 46, 42, 68, 40,
+        A0, 0D, 04, 56, 42, 78, 40,
+        A0, 0D, 04, 5C, 42, 80, 40,
+        A0, 0D, 04, CA, 42, 68, 40,
+        A0, 0D, 06, 06, 42, 00, 02, F2, F2,
+        A0, 0D, 06, 32, 4A, 53, 07, 00, 1B, 
+        A0, 0D, 06, 46, 4A, 33, 07, 00, 07,
+        A0, 0D, 06, 56, 4A, 43, 07, 00, 07,
+        A0, 0D, 06, 5C, 4A, 11, 07, 01, 07,
+        A0, 0D, 06, 34, 44, 66, 0A, 00, 00, 
+        A0, 0D, 06, 48, 44, 65, 0A, 00, 00,
+        A0, 0D, 06, 58, 44, 55, 08, 00, 00,
+        A0, 0D, 06, 5E, 44, 55, 08, 00, 00,
+        A0, 0D, 06, CA, 44, 65, 0A, 00, 00,
+        A0, 0D, 06, 06, 44, 04, 04, C4, 00,
+        A0, 0D, 06, 34, 2D, DC, 20, 04, 00,
+        A0, 0D, 06, 48, 2D, 15, 34, 1F, 01, 
+        A0, 0D, 06, 58, 2D, 0D, 48, 0C, 01, 
+        A0, 0D, 06, 5E, 2D, 0D, 5A, 0C, 01, 
+        A0, 0D, 06, CA, 2D, 15, 34, 1F, 01
+}
+
+NXP_RF_CONF_BLK_2={
+20, 02, D6, 01, A0, 34, D2, 23, 04, 18, 07, 00, 00, 20, 40, 00, BE, 23, 60, 00, 2B, 13, 40, 00, B8, 21, 60, 00, 38, 35, 00, 00, 18, 46, 08, 00, DE, 54, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 48, 01, 00, 00, 08, 03, 00, 00, 08, 01, 00, 00, C8, 02, 00, 00, C8, 00, 00, 00, 88, 02, 00, 00, 48, 02, 00, 00, B8, 00, 00, 00, 68, 00, 00, 00, 18, 00, 00, 00, 08, 02, 00, 00, 00, 00, 00, 00, 00, 00, 07, 00, 20, 40, 00, BE, 23, 60, 00, 2B, 13, 40, 00, B8, 21, 60, 00, 38, 35, 00, 00, 18, 46, 08, 00, DE, 54, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 08, 02, 00, 00, 48, 01, 00, 00, 08, 03, 00, 00, 08, 01, 00, 00, C8, 02, 00, 00, C8, 00, 00, 00, 88, 02, 00, 00, 48, 02, 00, 00, B8, 00, 00, 00, 68, 00, 00, 00, 18, 00, 00, 00, 08, 02, 00, 00, 00, 00
+}
+
+
+NXP_RF_CONF_BLK_3={
+20, 02, 5B, 01, A0, 0B, 57, 11, 11, 90, 78, 0F, 4E, 00, 3D, 95, 00, 00, 3D, 9F, 00, 00, 50, 9F, 00, 00, 59, 9F, 00, 00, 5A, 9F, 00, 00, 64, 9F, 00, 00, 65, 9F, 00, 00, 6E, 9F, 00, 00, 72, 9F, 00, 00, 79, 9F, 00, 00, 7B, 9F, 00, 00, 84, 9F, 00, 00, 86, 9F, 00, 00, 8F, 9F, 00, 00, 91, 9F, 00, 00, 9A, 9F, 00, 00, A1, 9F, 00, 00, A7, 9F, 00, 00, B0, 1F, 00, 00, B9, 1F, 00, 00
+}
+
+###############################################################################
+# Set configuration optimization decision setting
+# Enable    = 0x01
+# Disable   = 0x00
+NXP_SET_CONFIG_ALWAYS=0x01
+
+###############################################################################
+# Core configuration rf field filter settings to enable set to 01 to disable set
+# to 00 last bit
+NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00 }
+
+###############################################################################
+# Core configuration extensions
+# It includes
+# Wired mode settings A0ED, A0EE
+# Tag Detector A040, A041, A043
+# Low Power mode A007
+# Clock settings A002, A003
+# PbF settings A008
+# Clock timeout settings A004
+# UICC SWP_INT1_EN_CFG - A0, EC
+# UICC2 SWP_INT2_EN_CFG - A0, ED,
+# eSE (SVDD) PWR REQ settings A0F2
+# How eSE connected to PN553 A012
+# UICC bit rate A0D1
+# SWP1A interface A0D4
+# DWP intf behavior config, SVDD Load activated by default if set to 0x31 - A037
+# For Symmetric baud rate  UICC's set A086 to 77
+NXP_CORE_CONF_EXTN={20, 02, 61, 10,
+    A0, EC, 01, 01,
+    A0, ED, 01, 00,
+    A0, 5E, 01, 01,
+    A0, 12, 01, 02,
+    A0, 40, 01, 00,
+    A0, 41, 01, 06,
+    A0, 42, 01, 0F,
+    A0, 43, 01, 03,
+    A0, DD, 01, 2D,
+    A0, D1, 01, 06,
+    A0, D4, 01, 01,
+    A0, 37, 01, 35,
+    A0, 86, 01, 77,
+    A0, 38, 04, 14, 0B, 0B, 00,
+    A0, 3A, 08, A0, 00, A0, 00, A0, 00, A0, 00,
+    A0, 29, 17, 1C, 07, 00, 1D, 00, 02, 00, 1D, 00, 02, 00, 40, F3, F3, 00, 43, F3, F3, 38, 70, 00, 00, 15
+   }
+
+###############################################################################
+# Core configuration settings
+# It includes
+# 18    - Poll Mode NFC-F:   PF_BIT_RATE
+# 21    - Poll Mode ISO-DEP: PI_BIT_RATE
+# 28    - Poll Mode NFC-DEP: PN_NFC_DEP_SPEED
+# 30    - Lis. Mode NFC-A:   LA_BIT_FRAME_SDD
+# 31    - Lis. Mode NFC-A:   LA_PLATFORM_CONFIG
+# 33    - Lis. Mode NFC-A:   LA_NFCID1
+# 50    - Lis. Mode NFC-F:   LF_PROTOCOL_TYPE
+# 54    - Lis. Mode NFC-F:   LF_CON_BITR_F
+# 5B    - Lis. Mode ISO-DEP: LI_BIT_RATE
+# 60    - Lis. Mode NFC-DEP: LN_WT
+# 80    - Other Param.:      RF_FIELD_INFO
+# 81    - Other Param.:      RF_NFCEE_ACTION
+# 82    - Other Param.:      NFCDEP_OP
+NXP_CORE_CONF={ 20, 02, 2E, 0E,
+    18, 01, 01,
+    21, 01, 00,
+    28, 01, 00,
+    30, 01, 08,
+    31, 01, 03,
+    32, 01, 60,
+    33, 04, 01, 02, 03, 04,
+    38, 01, 01,
+    50, 01, 02,
+    54, 01, 06,
+    5B, 01, 00,
+    80, 01, 01,
+    81, 01, 01,
+    82, 01, 0E
+    }
+
+###############################################################################
+# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set
+# to 0x00
+NXP_I2C_FRAGMENTATION_ENABLED=0x00
+
+###############################################################################
+# Mifare Classic Key settings
+#NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5,
+#                                     A0, 52, 06, D3, F7, D3, F7, D3, F7,
+#                                     A0, 53, 06, FF, FF, FF, FF, FF, FF,
+#                                     A0, 54, 06, 00, 00, 00, 00, 00, 00}
+
+###############################################################################
+# Default SE Options
+# No secure element 0x00
+# eSE               0x01
+# UICC              0x02
+# UICC2             0x04
+NXP_DEFAULT_SE=0x07
+
+
+###############################################################################
+#Enable SWP full power mode when phone is power off
+NXP_SWP_FULL_PWR_ON=0x00
+
+###############################################################################
+#### Select the CHIP ####
+#PN547C2            0x01
+#PN65T              0x02
+#PN548AD            0x03
+#PN66T              0x04
+#PN551              0x05
+#PN67T              0x06
+#PN553              0x07
+#PN80T              0x08
+NXP_NFC_CHIP=0x07
+
+###############################################################################
+# CE when Screen state is locked
+# This setting is for DEFAULT_AID_ROUTE,
+# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE
+# Disable           0x00
+# Enable            0x01
+NXP_CE_ROUTE_STRICT_DISABLE=0x01
+
+###############################################################################
+#Timeout in secs to get NFCEE Discover notification
+NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20
+
+###############################################################################
+NXP_DEFAULT_NFCEE_TIMEOUT=20
+
+###############################################################################
+#Timeout in secs
+NXP_SWP_RD_START_TIMEOUT=0x0A
+
+###############################################################################
+#Timeout in secs
+NXP_SWP_RD_TAG_OP_TIMEOUT=0x01
+
+###############################################################################
+#Set the default AID route Location :
+#This settings will be used when application does not set this parameter
+# host  0x00
+# eSE   0x01
+# UICC  0x02
+DEFAULT_AID_ROUTE=0x02
+
+###############################################################################
+# Configure the default NfcA/IsoDep techology and protocol route. Can be
+# either a secure element (e.g. 0xF4) or the host (0x00)
+# host  0x00
+# eSE   0x01
+# UICC  0x02
+DEFAULT_ISODEP_ROUTE=0x02
+
+###############################################################################
+# Configure the single default SE to use.  The default is to use the first
+# SE that is detected by the stack.  This value might be used when the phone
+# supports multiple SE (e.g. 0xC0 and 0x80) but you want to force it to use
+# one of them (e.g. 0xC0).
+# host  0x00
+# eSE   0x01
+# UICC  0x02
+DEFAULT_OFFHOST_ROUTE=0x02
+
+###############################################################################
+# Configure the single default SE to use.  The default is to use the first
+# SE that is detected by the stack.  This value might be used when the phone
+# supports multiple SE (e.g. 0xF3 and 0xF4) but you want to force it to use
+# one of them (e.g. 0xF4).
+# host  0x00
+# eSE   0x01
+# UICC  0x02
+DEFAULT_NFCF_ROUTE=0x02
+
+###############################################################################
+#Set the default Felica T3T System Code OffHost route Location :
+#This settings will be used when application does not set this parameter
+# host  0x00
+# eSE   0x01
+DEFAULT_SYS_CODE_ROUTE=0x02
+
+###############################################################################
+#Set the default AID Power state :
+#This settings will be used when application does not set this parameter
+# bit pos 0 = Switch On
+# bit pos 1 = Switch Off
+# bit pos 2 = Battery Off
+# bit pos 3 = Screen Off
+# bit pos 4 = Screen Lock
+DEFAULT_AID_PWR_STATE=0x3B
+
+###############################################################################
+#Set the Mifare Desfire Power state :
+#This settings will be used when application does not set this parameter
+# bit pos 0 = Switch On
+# bit pos 1 = Switch Off
+# bit pos 2 = Battery Off
+# bit pos 3 = Screen Off
+# bit pos 4 = Screen Lock
+DEFAULT_ISODEP_PWR_STATE=0x3B
+
+###############################################################################
+#Set the Mifare CLT Power state :
+#This settings will be used when application does not set this parameter
+# bit pos 0 = Switch On
+# bit pos 1 = Switch Off
+# bit pos 2 = Battery Off
+# bit pos 3 = Screen Off
+# bit pos 4 = Screen Lock
+DEFAULT_OFFHOST_PWR_STATE=0x3B
+
+###############################################################################
+#Set the Felica CLT Power state :
+#This settings will be used when application does not set this parameter
+# bit pos 0 = Switch On
+# bit pos 1 = Switch Off
+# bit pos 2 = Battery Off
+# bit pos 3 = Screen Off
+# bit pos 4 = Screen Lock
+DEFAULT_NFCF_PWR_STATE=0x3B
+
+###############################################################################
+#Set the SYS_CODE Power state :
+#This settings will be used when application does not set this parameter
+# bit pos 0 = Switch On
+# bit pos 1 = Switch Off
+# bit pos 2 = Battery Off
+# bit pos 3 = Screen Off
+# bit pos 4 = Screen Lock
+DEFAULT_SYS_CODE_PWR_STATE=0x3B
+
+###############################################################################
+# Configure the NFC Extras to open and use a static pipe.  If the value is
+# not set or set to 0, then the default is use a dynamic pipe based on a
+# destination gate (see NFA_HCI_DEFAULT_DEST_GATE).  Note there is a value
+# for each UICC (where F3="UICC0" and F4="UICC1")
+OFF_HOST_ESE_PIPE_ID=0x19
+OFF_HOST_SIM_PIPE_ID=0x0A
+
+###############################################################################
+# Bail out mode
+#  If set to 1, NFCC is using bail out mode for either Type A or Type B poll.
+NFA_POLL_BAIL_OUT_MODE=0x01
+
+###############################################################################
+# AID Matching platform options
+# AID_MATCHING_L 0x01
+# AID_MATCHING_K 0x02
+AID_MATCHING_PLATFORM=0x01
+
+###############################################################################
+#CHINA_TIANJIN_RF_SETTING
+#Enable  0x01
+#Disable  0x00
+NXP_CHINA_TIANJIN_RF_ENABLED=0x01
+
+###############################################################################
+#SWP_SWITCH_TIMEOUT_SETTING
+# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60].
+# Timeout in milliseconds, for example
+# No Timeout  0x00
+# 10 millisecond timeout 0x0A
+NXP_SWP_SWITCH_TIMEOUT=0x0A
+
+###############################################################################
+# Loader service version
+# NFC service checks for LS version 2.0 or 2.1
+# LS2.0 0x20
+# LS2.1 0x21
+# LS2.2 0x22
+# AT NFC service intialization
+NXP_LOADER_SERVICE_VERSION=0x22
+
+###############################################################################
+#Timeout value  in milliseconds for NFCC standby mode.The range is between 5000
+#msec to 20000 msec and zero is to disable.
+NXP_NFCC_STANDBY_TIMEOUT=20000
+
+###############################################################################
+#Dynamic RSSI feature enable
+# Disable           0x00
+# Enable            0x01
+NXP_AGC_DEBUG_ENABLE=0x00
+
+###############################################################################
+#Virtual Mode ESE and Wired Mode ongoing delay Wired Mode
+# For Technology routing to ESE Technology Mask = 4
+# For ISO-DEP Protocol routing to ESE Mask      = 2
+# It can also take TECH|PROTO    = 6
+# To ignore the delay set mask to = 0
+NXP_ESE_WIRED_PRT_MASK=0x00
+
+###############################################################################
+#Virtual Mode UICC and Wired Mode  ongoing delay Wired Mode
+#For Technology routing to UICC Technology Mask = 4
+#For ISO-DEP Protocol routing to UICC set Mask  = 2
+#For Select AID Routing to UICC       set Mask  = 1
+#It can also take values TECH|PROTO|SELECT_AID  = 7 , 6 , 5 ,3 .To ignore delay
+#set mask = 0
+NXP_UICC_WIRED_PRT_MASK=0x00
+
+###############################################################################
+#RF field true delay Wired Mode
+# delay wired mode = 1
+# allow wired mode = 0
+NXP_WIRED_MODE_RF_FIELD_ENABLE=0x00
+
+###############################################################################
+#Config to allow adding aids
+#NFC on/off is required after this config
+#1 = enabling adding aid  to NFCC routing table.
+#0 = disabling adding aid to NFCC routing table.
+NXP_ENABLE_ADD_AID=0x01
+
+###############################################################################
+# JCOP-3.3 continuous process timeout in msec and value should be in Hexadecimal
+# JCOP CP TIMEOUT
+NXP_CP_TIMEOUT={00, 77}
+
+###############################################################################
+# Enable/Disable checking default proto SE Id
+# Disable           0x00
+# Enable            0x01
+NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01
+
+###############################################################################
+#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE
+#Enable/Disable block number checks for china transit use case
+#Enable  0x01
+#Disable  0x00
+NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01
+
+###############################################################################
+#Enable NXP NCI runtime parser library
+#Enable 0x01
+#Disable 0x00
+NXP_NCI_PARSER_LIBRARY=0x00
+
+###############################################################################
+#This config will enable different level of Rf transaction debugs based on the
+#following values provided. Decoded information will be printed in adb logcat
+#Debug Mode         Levels
+#Disable Debug      0x00
+#L1 Debug           0x01
+#L2 Debug           0x02
+#L1 & L2 Debug      0x03
+#L1 & L2 & RSSI     0x04
+#L1 & L2 & Felica   0x05
+#NXP_CORE_PROP_SYSTEM_DEBUG=0x00
+
+###############################################################################
+# Enable/Disable Block Route feature.
+# Block Route will restrict routing to first matched rule
+# Block Route enable   0x01
+# Block Route disable  0x00
+AID_BLOCK_ROUTE=0x01
+
+###############################################################################
+# Enable or Disable RF_STATUS_UPDATE to EseHal module
+# Disable           0x00
+# Enable            0x01
+RF_STATUS_UPDATE_ENABLE=0x00
+
+###############################################################################
+# Timeout value in milliseconds to send response for Felica command received
+NXP_HCEF_CMD_RSP_TIMEOUT_VALUE=5000
+###############################################################################
+# Vendor Specific Proprietary Protocol & Discovery Configuration
+# Set to 0xFF if unsupported
+#  byte[0] NCI_PROTOCOL_18092_ACTIVE
+#  byte[1] NCI_PROTOCOL_B_PRIME
+#  byte[2] NCI_PROTOCOL_DUAL
+#  byte[3] NCI_PROTOCOL_15693
+#  byte[4] NCI_PROTOCOL_KOVIO
+#  byte[5] NCI_PROTOCOL_MIFARE
+#  byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
+#  byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
+#  byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
+NFA_PROPRIETARY_CFG={05, FF, FF, 06, 81, 80, 70, FF, FF}
+
+###############################################################################
+#White list of Hosts
+#This values will be the Hosts(NFCEEs) in the HCI Network.
+DEVICE_HOST_WHITE_LIST={C0, 02}
+
+###############################################################################
+#OffHost UICC route location for MultiSE
+#UICC1 = 02
+#UICC2 = 03
+OFFHOST_ROUTE_UICC={02}
+
+###############################################################################
+# Choose the presence-check algorithm for type-4 tag.  If not defined, the default value is 1.
+# 0  NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
+# 1  NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
+# 2 NFA_RW_PRES_CHK_ISO_DEP_NAK; Type - 4 tag protocol iso-dep nak presence check
+PRESENCE_CHECK_ALGORITHM=2
+
+###############################################################################
+# Extended APDU length for ISO_DEP
+ISO_DEP_MAX_TRANSCEIVE=0xFEFF
+
+###############################################################################
+# Fix Card Emulation issue when power off
+NXP_CORE_PWR_OFF_AUTONOMOUS_ENABLE=0x01
+
+###############################################################################

surya-vendor.mk

@@ -6,13 +6,6 @@ PRODUCT_SOONG_NAMESPACES += \
     vendor/xiaomi/surya
 
 PRODUCT_COPY_FILES += \
-    vendor/xiaomi/surya/proprietary/system_ext/etc/dpm/dpm.conf:$(TARGET_COPY_OUT_SYSTEM_EXT)/etc/dpm/dpm.conf \
-    vendor/xiaomi/surya/proprietary/system_ext/etc/init/dpmd.rc:$(TARGET_COPY_OUT_SYSTEM_EXT)/etc/init/dpmd.rc \
-    vendor/xiaomi/surya/proprietary/system_ext/etc/permissions/audiosphere.xml:$(TARGET_COPY_OUT_SYSTEM_EXT)/etc/permissions/audiosphere.xml \
-    vendor/xiaomi/surya/proprietary/system_ext/etc/permissions/com.qti.dpmframework.xml:$(TARGET_COPY_OUT_SYSTEM_EXT)/etc/permissions/com.qti.dpmframework.xml \
-    vendor/xiaomi/surya/proprietary/system_ext/etc/permissions/dpmapi.xml:$(TARGET_COPY_OUT_SYSTEM_EXT)/etc/permissions/dpmapi.xml \
-    vendor/xiaomi/surya/proprietary/system_ext/etc/permissions/qcrilhook.xml:$(TARGET_COPY_OUT_SYSTEM_EXT)/etc/permissions/qcrilhook.xml \
-    vendor/xiaomi/surya/proprietary/system_ext/etc/permissions/qti_permissions.xml:$(TARGET_COPY_OUT_SYSTEM_EXT)/etc/permissions/qti_permissions.xml \
     vendor/xiaomi/surya/proprietary/vendor/etc/acdbdata/IDP/IDP_Bluetooth_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/IDP/IDP_Bluetooth_cal.acdb \
     vendor/xiaomi/surya/proprietary/vendor/etc/acdbdata/IDP/IDP_Codec_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/IDP/IDP_Codec_cal.acdb \
     vendor/xiaomi/surya/proprietary/vendor/etc/acdbdata/IDP/IDP_General_cal.acdb:$(TARGET_COPY_OUT_VENDOR)/etc/acdbdata/IDP/IDP_General_cal.acdb \
@@ -66,77 +59,15 @@ PRODUCT_COPY_FILES += \
     vendor/xiaomi/surya/proprietary/vendor/etc/camera/score_icon.png:$(TARGET_COPY_OUT_VENDOR)/etc/camera/score_icon.png \
     vendor/xiaomi/surya/proprietary/vendor/etc/camera/vidhance_calibration:$(TARGET_COPY_OUT_VENDOR)/etc/camera/vidhance_calibration \
     vendor/xiaomi/surya/proprietary/vendor/etc/camera/watermark_font_2300_3199.dat:$(TARGET_COPY_OUT_VENDOR)/etc/camera/watermark_font_2300_3199.dat \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/mwqem.conf:$(TARGET_COPY_OUT_VENDOR)/etc/cne/mwqem.conf \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/profileMwqem.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/profileMwqem.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ATT/ATT_profile1.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ATT/ATT_profile2.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile3.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ATT/ATT_profile3.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile4.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ATT/ATT_profile4.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile5.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ATT/ATT_profile5.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ATT/ATT_profile6.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ATT/ATT_profile6.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ROW/ROW_profile1.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile15.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ROW/ROW_profile15.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile16.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ROW/ROW_profile16.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile17.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ROW/ROW_profile17.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile18.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ROW/ROW_profile18.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile19.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ROW/ROW_profile19.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ROW/ROW_profile2.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile20.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ROW/ROW_profile20.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile21.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ROW/ROW_profile21.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile3.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ROW/ROW_profile3.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile32.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ROW/ROW_profile32.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile4.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ROW/ROW_profile4.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile5.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ROW/ROW_profile5.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile6.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ROW/ROW_profile6.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/ROW/ROW_profile7.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/ROW/ROW_profile7.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile1.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/VZW/VZW_profile1.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile2.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/VZW/VZW_profile2.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile3.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/VZW/VZW_profile3.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile4.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/VZW/VZW_profile4.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile5.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/VZW/VZW_profile5.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/cne/wqeclient/VZW/VZW_profile6.xml:$(TARGET_COPY_OUT_VENDOR)/etc/cne/wqeclient/VZW/VZW_profile6.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/configstore/vpp.configstore.xml:$(TARGET_COPY_OUT_VENDOR)/etc/configstore/vpp.configstore.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/data/dsi_config.xml:$(TARGET_COPY_OUT_VENDOR)/etc/data/dsi_config.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/data/netmgr_config.xml:$(TARGET_COPY_OUT_VENDOR)/etc/data/netmgr_config.xml \
-    vendor/xiaomi/surya/proprietary/vendor/etc/gpfspath_oem_config.xml:$(TARGET_COPY_OUT_VENDOR)/etc/gpfspath_oem_config.xml \
     vendor/xiaomi/surya/proprietary/vendor/etc/hdr_config.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/hdr_config.cfg \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/android.hardware.bluetooth@1.0-service-qti.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/android.hardware.bluetooth@1.0-service-qti.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/android.hardware.drm@1.3-service.widevine.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/android.hardware.drm@1.3-service.widevine.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/android.hardware.gatekeeper@1.0-service-qti.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/android.hardware.gatekeeper@1.0-service-qti.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/android.hardware.keymaster@4.0-service-qti.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/android.hardware.keymaster@4.0-service-qti.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/cnd.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/cnd.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/dataadpl.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/dataadpl.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/dataqti.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/dataqti.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/dpmQmiMgr.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/dpmQmiMgr.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/ims_rtp_daemon.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/ims_rtp_daemon.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/imsdatadaemon.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/imsdatadaemon.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/imsqmidaemon.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/imsqmidaemon.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/imsrcsd.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/imsrcsd.rc \
     vendor/xiaomi/surya/proprietary/vendor/etc/init/init.batterysecret.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.batterysecret.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/init.time_daemon.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.time_daemon.rc \
     vendor/xiaomi/surya/proprietary/vendor/etc/init/init.vendor.sensors.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.vendor.sensors.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/ipa_fws.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/ipa_fws.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/netmgrd.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/netmgrd.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/qcrild.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/qcrild.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/qseecomd.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/qseecomd.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/vendor.qti.adsprpc-sscrpc-service.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.qti.adsprpc-sscrpc-service.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/vendor.qti.cdsprpc-service.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.qti.cdsprpc-service.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/vendor.qti.hardware.alarm@1.0-service.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.qti.hardware.alarm@1.0-service.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/vendor.qti.hardware.capabilityconfigstore@1.0-service.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.qti.hardware.capabilityconfigstore@1.0-service.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/vendor.qti.hardware.dsp@1.0-service.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.qti.hardware.dsp@1.0-service.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/vendor.qti.hardware.soter@1.0-service.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.qti.hardware.soter@1.0-service.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/vendor.qti.hardware.tui_comm@1.0-service-qti.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.qti.hardware.tui_comm@1.0-service-qti.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/vendor.qti.media.c2@1.0-service.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.qti.media.c2@1.0-service.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/vendor.qti.rmt_storage.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.qti.rmt_storage.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/vendor.qti.tftp.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.qti.tftp.rc \
     vendor/xiaomi/surya/proprietary/vendor/etc/init/vendor.sensors.qti.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vendor.sensors.qti.rc \
-    vendor/xiaomi/surya/proprietary/vendor/etc/init/vppservice.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/vppservice.rc \
+    vendor/xiaomi/surya/proprietary/vendor/etc/libnfc-nci.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nci.conf \
+    vendor/xiaomi/surya/proprietary/vendor/etc/libnfc-nxp-pnscr.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp-pnscr.conf \
+    vendor/xiaomi/surya/proprietary/vendor/etc/libnfc-nxp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-nxp.conf \
     vendor/xiaomi/surya/proprietary/vendor/etc/permissions/com.fingerprints.extension.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.fingerprints.extension.xml \
     vendor/xiaomi/surya/proprietary/vendor/etc/sdr_config.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/sdr_config.cfg \
-    vendor/xiaomi/surya/proprietary/vendor/etc/seccomp_policy/codec2.vendor.base.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/codec2.vendor.base.policy \
-    vendor/xiaomi/surya/proprietary/vendor/etc/seccomp_policy/codec2.vendor.ext.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/codec2.vendor.ext.policy \
-    vendor/xiaomi/surya/proprietary/vendor/etc/seccomp_policy/imsrtp.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/imsrtp.policy \
-    vendor/xiaomi/surya/proprietary/vendor/etc/seccomp_policy/vendor.qti.hardware.dsp.policy:$(TARGET_COPY_OUT_VENDOR)/etc/seccomp_policy/vendor.qti.hardware.dsp.policy \
     vendor/xiaomi/surya/proprietary/vendor/etc/sensors/config/adux1050_0.json:$(TARGET_COPY_OUT_VENDOR)/etc/sensors/config/adux1050_0.json \
     vendor/xiaomi/surya/proprietary/vendor/etc/sensors/config/bmi160_0.json:$(TARGET_COPY_OUT_VENDOR)/etc/sensors/config/bmi160_0.json \
     vendor/xiaomi/surya/proprietary/vendor/etc/sensors/config/lsm6ds3c_0.json:$(TARGET_COPY_OUT_VENDOR)/etc/sensors/config/lsm6ds3c_0.json \
@@ -255,109 +186,35 @@ PRODUCT_COPY_FILES += \
     vendor/xiaomi/surya/proprietary/vendor/lib64/camera/fdconfigpreview.bin:$(TARGET_COPY_OUT_VENDOR)/lib64/camera/fdconfigpreview.bin \
     vendor/xiaomi/surya/proprietary/vendor/lib64/camera/fdconfigpreviewlite.bin:$(TARGET_COPY_OUT_VENDOR)/lib64/camera/fdconfigpreviewlite.bin \
     vendor/xiaomi/surya/proprietary/vendor/lib64/camera/fdconfigvideo.bin:$(TARGET_COPY_OUT_VENDOR)/lib64/camera/fdconfigvideo.bin \
-    vendor/xiaomi/surya/proprietary/vendor/lib64/camera/fdconfigvideolite.bin:$(TARGET_COPY_OUT_VENDOR)/lib64/camera/fdconfigvideolite.bin \
+    vendor/xiaomi/surya/proprietary/vendor/lib64/camera/fdconfigvideolite.bin:$(TARGET_COPY_OUT_VENDOR)/lib64/camera/fdconfigvideolite.bin
-    vendor/xiaomi/surya/proprietary/vendor/radio/qcril_database/qcril.db:$(TARGET_COPY_OUT_VENDOR)/radio/qcril_database/qcril.db \
-    vendor/xiaomi/surya/proprietary/vendor/radio/qcril_database/upgrade/0_initial.sql:$(TARGET_COPY_OUT_VENDOR)/radio/qcril_database/upgrade/0_initial.sql \
-    vendor/xiaomi/surya/proprietary/vendor/radio/qcril_database/upgrade/10_version_update_ecc_table.sql:$(TARGET_COPY_OUT_VENDOR)/radio/qcril_database/upgrade/10_version_update_ecc_table.sql \
-    vendor/xiaomi/surya/proprietary/vendor/radio/qcril_database/upgrade/1_version_intro.sql:$(TARGET_COPY_OUT_VENDOR)/radio/qcril_database/upgrade/1_version_intro.sql \
-    vendor/xiaomi/surya/proprietary/vendor/radio/qcril_database/upgrade/2_version_add_wps_config.sql:$(TARGET_COPY_OUT_VENDOR)/radio/qcril_database/upgrade/2_version_add_wps_config.sql \
-    vendor/xiaomi/surya/proprietary/vendor/radio/qcril_database/upgrade/3_version_update_wps_config.sql:$(TARGET_COPY_OUT_VENDOR)/radio/qcril_database/upgrade/3_version_update_wps_config.sql \
-    vendor/xiaomi/surya/proprietary/vendor/radio/qcril_database/upgrade/4_version_update_ecc_table.sql:$(TARGET_COPY_OUT_VENDOR)/radio/qcril_database/upgrade/4_version_update_ecc_table.sql \
-    vendor/xiaomi/surya/proprietary/vendor/radio/qcril_database/upgrade/5_version_update_ecc_table.sql:$(TARGET_COPY_OUT_VENDOR)/radio/qcril_database/upgrade/5_version_update_ecc_table.sql \
-    vendor/xiaomi/surya/proprietary/vendor/radio/qcril_database/upgrade/6_version_update_ecc_table.sql:$(TARGET_COPY_OUT_VENDOR)/radio/qcril_database/upgrade/6_version_update_ecc_table.sql \
-    vendor/xiaomi/surya/proprietary/vendor/radio/qcril_database/upgrade/7_version_update_ecc_table.sql:$(TARGET_COPY_OUT_VENDOR)/radio/qcril_database/upgrade/7_version_update_ecc_table.sql \
-    vendor/xiaomi/surya/proprietary/vendor/radio/qcril_database/upgrade/8_version_update_ecc_table.sql:$(TARGET_COPY_OUT_VENDOR)/radio/qcril_database/upgrade/8_version_update_ecc_table.sql \
-    vendor/xiaomi/surya/proprietary/vendor/radio/qcril_database/upgrade/9_version_update_ecc_table_127531.sql:$(TARGET_COPY_OUT_VENDOR)/radio/qcril_database/upgrade/9_version_update_ecc_table_127531.sql
 
 PRODUCT_PACKAGES += \
-    eglSubDriverAndroid \
-    libEGL_adreno \
-    libGLESv1_CM_adreno \
-    libGLESv2_adreno \
-    libq3dtools_adreno \
-    libq3dtools_esx \
-    vulkan.adreno \
-    libC2D2 \
-    libCB \
-    libOpenCL \
     libacdb-fts \
     libacdbloader \
     libacdbrtac \
     libadiertac \
-    libadreno_utils \
-    libadsp_default_listener \
-    libadsprpc \
     libaudcal \
     libaudioalsa \
     libaudioconfigstore \
     libaudioparsers \
     libbatterylistener \
-    libc2d30_bltlib \
-    libcdsp_default_listener \
-    libcdsprpc \
     libcirrusspkrprot \
     libcomprcapture \
-    libdiag \
-    libdsutils \
     libexthwplugin \
-    libgsl \
     libhdmiedid \
     libhdmipassthru \
     libhfp \
-    libidl \
-    libllvm-glnext \
-    libllvm-qcom \
-    libmdmdetect \
-    libmmosal \
-    libqmi \
-    libqmi_cci \
-    libqmi_client_helper \
-    libqmi_client_qmux \
-    libqmi_common_so \
-    libqmi_csi \
-    libqmi_encdec \
-    libqmiservices \
     libqtigef \
     libsndmonitor \
     libspkrprot \
     libssrec \
-    libvpphvx \
-    libvpplibrary \
-    libasphere \
-    vendor.qti.hardware.dsp@1.0 \
-    vendor.qti.hardware.tui_comm@1.0 \
-    vendor.qti.hardware.vpp@1.1 \
-    vendor.qti.hardware.vpp@1.2 \
-    vendor.qti.hardware.vpp@1.3 \
     btaudio_offload_if \
     audio.primary.sm6150 \
-    sound_trigger.primary.sm6150 \
-    vendor.qti.hardware.bluetooth_audio@2.1-impl \
-    libOmxAacDec \
-    libOmxAlacDec \
-    libOmxAmrDec \
-    libOmxAmrwbplusDec \
-    libOmxApeDec \
-    libOmxDsdDec \
-    libOmxEvrcDec \
-    libOmxQcelp13Dec \
-    libOmxVpp \
-    libOmxWmaDec \
     liba2dpoffload \
     libadm \
-    libadpcmdec \
     libaudio_log_utils \
-    libbluetooth_audio_session_qti \
-    libbluetooth_audio_session_qti_2_1 \
     libdrc \
-    libdsd2pcm \
-    libmulawdec \
-    libqcodec2 \
-    libsmwrapper \
     libsurround_3mic_proc \
-    libvppclient \
-    libshoebox \
-    android.hardware.camera.provider@2.4-legacy \
     com.qti.sensor.ofilm_hi259 \
     com.qti.sensor.ofilm_imx682 \
     com.qti.sensor.ofilm_ov02b1b \
@@ -432,51 +289,13 @@ PRODUCT_PACKAGES += \
     com.xiaomi.node.misegment \
     libdepthmapwrapper \
     libmmcamera_cac3 \
-    com.qualcomm.qti.dpm.api@1.0_vendor \
-    com.qualcomm.qti.imscmservice@2.0 \
-    com.qualcomm.qti.imscmservice@2.1 \
-    com.qualcomm.qti.imscmservice@2.2 \
-    com.qualcomm.qti.uceservice@2.0 \
-    com.qualcomm.qti.uceservice@2.1 \
-    com.qualcomm.qti.uceservice@2.2 \
-    com.qualcomm.qti.uceservice@2.3 \
-    deviceInfoServiceModule \
-    android.hardware.bluetooth@1.0-impl-qti \
-    android.hardware.gatekeeper@1.0-impl-qti \
     camera.qcom \
-    com.dsi.ant@1.0-impl \
     com.qti.chi.override \
-    consumerir.sm6150 \
     fingerprint.fpc.sm6150 \
     fingerprint.goodix.sm6150 \
-    vendor.qti.gnss@4.0-impl \
-    vendor.qti.hardware.alarm@1.0-impl \
-    vendor.qti.hardware.bluetooth_sar@1.1-impl \
-    vendor.qti.hardware.btconfigstore@1.0-impl \
-    vendor.qti.hardware.btconfigstore@2.0-impl \
-    vendor.qti.hardware.capabilityconfigstore@1.0-impl \
-    vendor.qti.hardware.fm@1.0-impl \
-    vendor.qti.hardware.soter@1.0-impl \
-    lib-imscmservice \
-    lib-imsdpl \
-    lib-imsqimf \
-    lib-imsrcs-v2 \
-    lib-imsrcsbaseimpl \
-    lib-imsvtcore \
-    lib-imsxml \
-    lib-rcsconfig \
-    lib-rtpcommon \
-    lib-rtpcore \
-    lib-rtpsl \
-    lib-siputility \
-    lib-uceservice \
     libFaceGrade \
-    libGPreqcancel \
-    libGPreqcancel_svc \
     libHalSuperSensorServer \
-    libQSEEComAPI \
     libSNPE \
-    libStDrvInt \
     libSuperSensor \
     libSuperSensorCPU \
     libVDClearShot \
@@ -503,9 +322,7 @@ PRODUCT_PACKAGES += \
     libarcsoft_preview_deflicker \
     libarcsoft_supernight \
     libbeauty_face_interface \
-    libbtnv \
     libc++_shared \
-    libcacertclient \
     libcamera_dirty \
     libcamera_nn_stub \
     libcamera_scene \
@@ -515,44 +332,14 @@ PRODUCT_PACKAGES += \
     libcamxstatscore \
     libcamxswprocessalgo \
     libcamxtintlessalgo \
-    libcdfw \
-    libcdfw_remote_api \
-    libcne \
-    libcneapiclient \
-    libcneoplookup \
     libcom.qti.chinodeutils \
-    libconfigdb \
-    libcpion \
-    libdataitems \
-    libdisplayqos \
     libdng_sdk2vendor \
-    libdpmqmihal \
-    libdrmfs \
-    libdrmtime \
-    libdsi_netctrl \
     libflaw \
     libft2vendor \
-    libgdtap \
     libgf_ca \
     libgf_hal \
     libgoodixhwfingerprint \
-    libhdcpsrm \
-    libhdr_tm \
     libhvx_interface \
-    libizat_client_api \
-    libizat_core \
-    libjnihelper \
-    libkeymasterdeviceutils \
-    libkeymasterutils \
-    liblbs_core \
-    libloc_api_v02 \
-    libloc_socket \
-    liblocationservice \
-    liblocationservice_glue \
-    liblowi_client \
-    liblowi_wifihal \
-    liblqe \
-    libmdsprpc \
     libmiStereoFactoryRemapLib \
     libmiai_portraitsupernight \
     libmiai_supernight \
@@ -563,49 +350,12 @@ PRODUCT_PACKAGES += \
     libmialgo_utils \
     libmialgoengine \
     libmibokeh_712 \
-    libminkdescriptor \
-    libminksocket \
     libmpbase \
-    libnetmgr \
-    libnetmgr_common \
-    libnetmgr_nr_fusion \
-    libnetmgr_rmnet_ext \
-    libnlnetmgr \
     liboemcrypto \
-    libops \
-    libpdmapper \
-    libpdnotifier \
-    libperipheral_client \
     libpn553_fw \
-    libqcbor \
-    libqcc_file_agent \
-    libqcmaputils \
-    libqcrilFramework \
-    libqcrildatactl \
-    libqdi \
-    libqdp \
-    libqisl \
-    libqrtr \
-    libqseed3 \
-    libqsocket \
-    libqtikeymaster4 \
-    librcc \
     libremosaic_wrapper \
     libremosaiclib \
-    libril-qc-hal-qmi \
-    libril-qc-logger \
-    librilqmiservices \
-    librpmb \
-    libsdedrm \
     libsdk_sr \
-    libsdm-color \
-    libsdm-colormgr-algo \
-    libsdm-diag \
-    libsdm-disp-vndapis \
-    libsdmextension \
-    libsdsprpc \
-    libsecureui \
-    libsecureui_svcsock \
     libsensorslog \
     libsns_device_mode_stub \
     libsns_fastRPC_util \
@@ -613,110 +363,21 @@ PRODUCT_PACKAGES += \
     libsns_registry_skel \
     libsnsapi \
     libsnsdiaglog \
-    libsoc_helper \
     libssc \
     libssc_default_listener \
-    libssd \
     libst_sr_models \
     libswregistrationalgo \
     libsymphony-cpu \
-    libsystem_health_mon \
     libthermalclient \
     libthermalfeature \
-    libtime_genoff \
-    libtinyxml2_1 \
     libtriplecam_optical_zoom_control \
     libtriplecam_video_optical_zoom \
-    libtrustedapploader \
     libvideofilter_only \
     libvidhance \
-    libwms \
-    libwqe \
-    libwvhidl \
     libxmi_high_dynamic_range \
-    libxml \
     libxml2_vendor \
-    libxtadapter \
-    libwvdrmengine \
-    qcrild_librilutils \
-    qtibus \
-    qtimutex \
     sensors.ssc \
-    vendor.qti.data.factory@2.0 \
-    vendor.qti.data.factory@2.1 \
-    vendor.qti.data.factory@2.2 \
-    vendor.qti.data.factory@2.3 \
-    vendor.qti.data.mwqem@1.0 \
-    vendor.qti.data.slm@1.0 \
-    vendor.qti.gnss@1.0 \
-    vendor.qti.gnss@1.1 \
-    vendor.qti.gnss@1.2 \
-    vendor.qti.gnss@2.0 \
-    vendor.qti.gnss@2.1 \
-    vendor.qti.gnss@3.0 \
-    vendor.qti.gnss@4.0-service \
-    vendor.qti.gnss@4.0 \
-    vendor.qti.hardware.alarm@1.0 \
-    vendor.qti.hardware.bluetooth_sar@1.0 \
-    vendor.qti.hardware.bluetooth_sar@1.1 \
-    vendor.qti.hardware.cacert@1.0 \
-    vendor.qti.hardware.camera.device@3.5 \
-    vendor.qti.hardware.data.cne.internal.api@1.0 \
-    vendor.qti.hardware.data.cne.internal.constants@1.0 \
-    vendor.qti.hardware.data.cne.internal.server@1.0 \
-    vendor.qti.hardware.data.connection@1.0 \
-    vendor.qti.hardware.data.connection@1.1 \
-    vendor.qti.hardware.data.dynamicdds@1.0 \
-    vendor.qti.hardware.data.iwlan@1.0 \
-    vendor.qti.hardware.data.latency@1.0 \
-    vendor.qti.hardware.data.lce@1.0 \
-    vendor.qti.hardware.data.qmi@1.0 \
     vendor.qti.hardware.fingerprint@1.0 \
-    vendor.qti.hardware.fm@1.0_vendor \
-    vendor.qti.hardware.mwqemadapter@1.0 \
-    vendor.qti.hardware.qccsyshal@1.0 \
-    vendor.qti.hardware.radio.am@1.0 \
-    vendor.qti.hardware.radio.ims@1.0 \
-    vendor.qti.hardware.radio.ims@1.1 \
-    vendor.qti.hardware.radio.ims@1.2 \
-    vendor.qti.hardware.radio.ims@1.3 \
-    vendor.qti.hardware.radio.ims@1.4 \
-    vendor.qti.hardware.radio.ims@1.5 \
-    vendor.qti.hardware.radio.ims@1.6 \
-    vendor.qti.hardware.radio.ims@1.7 \
-    vendor.qti.hardware.radio.internal.deviceinfo@1.0 \
-    vendor.qti.hardware.radio.lpa@1.0 \
-    vendor.qti.hardware.radio.lpa@1.1 \
-    vendor.qti.hardware.radio.lpa@1.2 \
-    vendor.qti.hardware.radio.qcrilhook@1.0 \
-    vendor.qti.hardware.radio.qtiradio@1.0 \
-    vendor.qti.hardware.radio.qtiradio@2.0 \
-    vendor.qti.hardware.radio.qtiradio@2.1 \
-    vendor.qti.hardware.radio.qtiradio@2.2 \
-    vendor.qti.hardware.radio.qtiradio@2.3 \
-    vendor.qti.hardware.radio.qtiradio@2.4 \
-    vendor.qti.hardware.radio.qtiradio@2.5 \
-    vendor.qti.hardware.radio.qtiradio@2.6 \
-    vendor.qti.hardware.radio.uim@1.0 \
-    vendor.qti.hardware.radio.uim@1.1 \
-    vendor.qti.hardware.radio.uim@1.2 \
-    vendor.qti.hardware.radio.uim_remote_client@1.0 \
-    vendor.qti.hardware.radio.uim_remote_client@1.1 \
-    vendor.qti.hardware.radio.uim_remote_client@1.2 \
-    vendor.qti.hardware.radio.uim_remote_server@1.0 \
-    vendor.qti.hardware.soter@1.0 \
-    vendor.qti.ims.callcapability@1.0 \
-    vendor.qti.ims.callinfo@1.0 \
-    vendor.qti.ims.factory@1.0 \
-    vendor.qti.ims.factory@1.1 \
-    vendor.qti.ims.rcsconfig@1.0 \
-    vendor.qti.ims.rcsconfig@1.1 \
-    vendor.qti.ims.rcsconfig@2.0 \
-    vendor.qti.ims.rcsconfig@2.1 \
-    vendor.qti.imsrtpservice@3.0-service-Impl \
-    vendor.qti.imsrtpservice@3.0_vendor \
-    vendor.qti.latency@2.0 \
-    vendor.qti.latency@2.1 \
     capi_v2_aptX_CLHDADV_Encoder \
     capi_v2_aptX_CLHDAD_Speech_Decoder \
     capi_v2_aptX_Classic \
@@ -746,85 +407,9 @@ PRODUCT_PACKAGES += \
     misound_res \
     tas25xx_TI_0 \
     tas25xx_TI_1 \
-    com.qualcomm.qti.dpm.api@1.0 \
-    fm_helium \
-    lib-imsvideocodec \
-    lib-imsvt \
-    lib-imsvtextutils \
-    lib-imsvtutils \
-    libdiag_system \
-    libdpmctmgr \
-    libdpmfdmgr \
-    libdpmframework \
-    libdpmtcm \
-    libfm-hci \
-    libimscamera_jni \
-    libimsmedia_jni \
-    vendor.qti.diaghal@1.0 \
-    vendor.qti.hardware.fm@1.0 \
-    vendor.qti.imsrtpservice@3.0 \
-    CACertService \
-    CneApp \
-    IWlanService \
-    SoterService \
-    TimeService \
-    PowerOffAlarm \
-    QtiTelephonyService \
-    dpmserviceapp \
-    ims \
-    qcrilmsgtunnel \
-    tcmclient \
     com.fingerprints.extension \
-    audiosphere \
-    com.qti.dpmframework \
-    dpmapi \
-    qcrilhook \
-    qti-telephony-common \
-    manifest_android.hardware.drm@1.3-service.widevine.xml \
-    vendor.qti.gnss@4.0-service.xml \
-    adpl \
-    adsprpcd \
     batterysecret \
-    cdsprpcd \
-    cnd \
-    cnss-daemon \
-    dpmQmiMgr \
-    dspservice \
-    hvdcp_opti \
-    android.hardware.bluetooth@1.0-service-qti \
-    android.hardware.drm@1.3-service.widevine \
-    android.hardware.gatekeeper@1.0-service-qti \
-    android.hardware.keymaster@4.0-service-qti \
-    qcrild \
-    vendor.qti.hardware.alarm@1.0-service \
-    vendor.qti.hardware.capabilityconfigstore@1.0-service \
-    vendor.qti.hardware.soter@1.0-service \
-    vendor.qti.hardware.tui_comm@1.0-service-qti \
-    vendor.qti.media.c2@1.0-service \
-    ims_rtp_daemon \
-    imsdatadaemon \
-    imsqmidaemon \
-    imsrcsd \
     init.qcom.sensors \
-    irsc_util \
-    loc_launcher \
-    lowi-server \
     mi_thermald \
-    msm_irqbalance \
-    netmgrd \
-    pd-mapper \
-    pm-proxy \
-    pm-service \
-    power_off_alarm \
-    qrtr-ns \
-    qseecomd \
-    qti \
-    rmt_storage \
     sensors.qti \
-    slim_daemon \
+    vibrator_calibration
-    tftp_server \
-    time_daemon \
-    vibrator_calibration \
-    vppservice \
-    xtra-daemon \
-    dpmd