m34x: Move libnfc-nci.conf to device tree
* That's the only thing from system partition so instead of extracting 7+ gb let's just move it here Change-Id: Ic1de6576072f01d6a4e3c630b2a7af48f69ad9f5 Signed-off-by: Majaahh <maja.blaszczak@proton.me>
This commit is contained in:
Majaahh
147
proprietary/vendor/etc/libnfc-nci.conf
vendored
147
proprietary/vendor/etc/libnfc-nci.conf
vendored
@@ -1,147 +0,0 @@
|
||||
########################### Start of libnfc-nci.conf ###########################
|
||||
|
||||
###############################################################################
|
||||
# Application options
|
||||
NFC_DEBUG_ENABLED=1
|
||||
|
||||
###############################################################################
|
||||
# File used for NFA storage
|
||||
NFA_STORAGE="/data/nfc"
|
||||
PRESERVE_STORAGE=0x01
|
||||
|
||||
###############################################################################
|
||||
# Force UICC to only listen to the following technology(s).
|
||||
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
|
||||
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
|
||||
UICC_LISTEN_TECH_MASK=0x07
|
||||
|
||||
###############################################################################
|
||||
# AID for Empty Select command
|
||||
# If specified, this AID will be substituted when an Empty SELECT command is
|
||||
# detected. The first byte is the length of the AID. Maximum length is 16.
|
||||
AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00}
|
||||
|
||||
###############################################################################
|
||||
# Default poll duration (in ms)
|
||||
# Default is 500ms if not set (see nfc_target.h)
|
||||
#NFA_DM_DISC_DURATION_POLL=333
|
||||
|
||||
###############################################################################
|
||||
# Force tag polling for the following technology(s).
|
||||
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
|
||||
# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
|
||||
# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
|
||||
# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO |
|
||||
# NFA_TECHNOLOGY_MASK_ACTIVE
|
||||
#
|
||||
# Notable bits:
|
||||
# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
|
||||
# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */
|
||||
# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
|
||||
# NFA_TECHNOLOGY_MASK_V 0x08 /* NFC Technology V */
|
||||
# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */
|
||||
# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology ACM active mode */
|
||||
POLLING_TECH_MASK=0x2F
|
||||
|
||||
###############################################################################
|
||||
# Force P2P to only listen for the following technology(s).
|
||||
# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
|
||||
# Default is NFA_TECHNOLOGY_MASK_ACTIVE
|
||||
# (type A passive is ignored to avoid interop issues in China).
|
||||
# (type F passive is ignored to support Japan)
|
||||
#
|
||||
# Notable bits:
|
||||
# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
|
||||
# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
|
||||
# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */
|
||||
P2P_LISTEN_TECH_MASK=0x00
|
||||
|
||||
###############################################################################
|
||||
# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h.
|
||||
# The value is set to 3 by default as it assumes we will discover 0xF2,
|
||||
# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced
|
||||
# so that the stack will not wait any longer than necessary.
|
||||
# Maximum EE supported number
|
||||
NFA_MAX_EE_SUPPORTED=0x03
|
||||
|
||||
###############################################################################
|
||||
# When screen is turned OFF, specify the desired CE mode to the controller.
|
||||
# 0: No card-emulation; DEFAULT
|
||||
# 1: Screen-off card-emulation enabled
|
||||
CE_ON_SCREEN_OFF_STATE=1
|
||||
|
||||
###############################################################################
|
||||
# In Switch OFF mode (phone switched-off), specify the desired CE mode to
|
||||
# the controller.
|
||||
# 0: No card-emulation; DEFAULT
|
||||
# 1: Switch-off card-emulation enabled
|
||||
CE_ON_SWITCH_OFF_STATE=1
|
||||
|
||||
###############################################################################
|
||||
# When screen is turned off, specify the desired power state of the controller.
|
||||
# 0: power-off-sleep state; DEFAULT
|
||||
# 1: full-power state
|
||||
# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
|
||||
SCREEN_OFF_POWER_STATE=1
|
||||
|
||||
###############################################################################
|
||||
# Value to use to force eSE power and SWP active
|
||||
ALWAYS_ON_SET_EE_POWER_AND_LINK_CONF=0x03
|
||||
|
||||
###############################################################################
|
||||
# AID_MATCHING constants
|
||||
# AID_MATCHING_EXACT_ONLY 0x00
|
||||
# AID_MATCHING_EXACT_OR_PREFIX 0x01
|
||||
# AID_MATCHING_PREFIX_ONLY 0x02
|
||||
# AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03
|
||||
AID_MATCHING_MODE=0x03
|
||||
|
||||
###############################################################################
|
||||
#Set the default Felica T3T System Code :
|
||||
#This settings will be used when application does not set this parameter
|
||||
DEFAULT_SYS_CODE={FE:FE}
|
||||
|
||||
###############################################################################
|
||||
# Value of NCI parameter NFCC_CONFIG_CONTROL
|
||||
# 0x00 NFCC is not allowed to manage RF configuration
|
||||
# 0x01 NFCC is allowed to manage RF configuration
|
||||
NFCC_CONFIG_CONTROL=0x01
|
||||
|
||||
###############################################################################
|
||||
#Select NCI device power states in which routing to off-host element is allowed.
|
||||
#Default: 0x3B.
|
||||
OFFHOST_AID_ROUTE_PWR_STATE=0x3B
|
||||
|
||||
###############################################################################
|
||||
# Use generic mifare reader implementation, not proprietary one.
|
||||
LEGACY_MIFARE_READER=0x0
|
||||
|
||||
###############################################################################
|
||||
# Block routing for unsupported power states
|
||||
# It means for AID routed to HCE, an error is returned in power modes not supported
|
||||
# by HCE (screen off, switch off) instead of routing to the secure element.
|
||||
# This behavior is required for GSMA certification.
|
||||
NFA_AID_BLOCK_ROUTE=1
|
||||
|
||||
###############################################################################
|
||||
#Set the HCE supported techs:
|
||||
#define NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
|
||||
#define NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */
|
||||
#define NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
|
||||
HOST_LISTEN_TECH_MASK = 0x7
|
||||
|
||||
###############################################################################
|
||||
# For Felica Japan target models, please uncomment this configuration to change
|
||||
# the polling loop period:
|
||||
#NFA_DM_DISC_DURATION_POLL=300
|
||||
|
||||
###############################################################################
|
||||
#Size of SNOOP buffer: NFC_SNOOP_BUFFER_SIZE*1024
|
||||
NFC_SNOOP_BUFFER_SIZE = 256
|
||||
|
||||
###############################################################################
|
||||
# NCI_RESET_TYPE options
|
||||
# Default 0x00, reset configurations everytime.
|
||||
# 0x01, reset configurations only once every boot.
|
||||
# 0x02, keep configurations.
|
||||
NCI_RESET_TYPE=0x00
|
||||
Reference in New Issue
Block a user