sm6375-common: Regenerate trew
Signed-off-by: HeroBuxx <me@herobuxx.me>
This commit is contained in:
HeroBuxx
Binary file not shown.
@@ -1,245 +0,0 @@
|
||||
#=============================================================================
|
||||
# Copyright (c) 2021 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2012-2013, 2016-2020, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are
|
||||
# met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above
|
||||
# copyright notice, this list of conditions and the following
|
||||
# disclaimer in the documentation and/or other materials provided
|
||||
# with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor the names of its
|
||||
# contributors may be used to endorse or promote products derived
|
||||
# from this software without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
|
||||
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
||||
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#=============================================================================
|
||||
|
||||
function configure_zram_parameters() {
|
||||
# Moto yangbq2: Skip this if we are using zram from fstab.
|
||||
using_zram_from_fstab=`getprop ro.vendor.zram.swapon`
|
||||
if [ "$using_zram_from_fstab" == "true" ]; then
|
||||
return
|
||||
fi
|
||||
MemTotalStr=`cat /proc/meminfo | grep MemTotal`
|
||||
MemTotal=${MemTotalStr:16:8}
|
||||
|
||||
# Zram disk - 75% for < 2GB devices .
|
||||
# For >2GB devices, size = 50% of RAM size. Limit the size to 4GB.
|
||||
|
||||
let RamSizeGB="( $MemTotal / 1048576 ) + 1"
|
||||
diskSizeUnit=M
|
||||
if [ $RamSizeGB -le 2 ]; then
|
||||
let zRamSizeMB="( $RamSizeGB * 1024 ) * 3 / 4"
|
||||
else
|
||||
let zRamSizeMB="( $RamSizeGB * 1024 ) / 2"
|
||||
fi
|
||||
|
||||
# use MB avoid 32 bit overflow
|
||||
if [ $zRamSizeMB -gt 4096 ]; then
|
||||
let zRamSizeMB=4096
|
||||
fi
|
||||
|
||||
if [ -f /sys/block/zram0/disksize ]; then
|
||||
if [ -f /sys/block/zram0/use_dedup ]; then
|
||||
echo 1 > /sys/block/zram0/use_dedup
|
||||
fi
|
||||
echo "$zRamSizeMB""$diskSizeUnit" > /sys/block/zram0/disksize
|
||||
|
||||
# ZRAM may use more memory than it saves if SLAB_STORE_USER
|
||||
# debug option is enabled.
|
||||
if [ -e /sys/kernel/slab/zs_handle ]; then
|
||||
echo 0 > /sys/kernel/slab/zs_handle/store_user
|
||||
fi
|
||||
if [ -e /sys/kernel/slab/zspage ]; then
|
||||
echo 0 > /sys/kernel/slab/zspage/store_user
|
||||
fi
|
||||
|
||||
mkswap /dev/block/zram0
|
||||
swapon /dev/block/zram0 -p 32758
|
||||
fi
|
||||
}
|
||||
|
||||
function configure_read_ahead_kb_values() {
|
||||
MemTotalStr=`cat /proc/meminfo | grep MemTotal`
|
||||
MemTotal=${MemTotalStr:16:8}
|
||||
|
||||
dmpts=$(ls /sys/block/*/queue/read_ahead_kb | grep -e dm -e mmc)
|
||||
|
||||
# Set 128 for <= 3GB &
|
||||
# set 512 for >= 4GB targets.
|
||||
if [ $MemTotal -le 3145728 ]; then
|
||||
ra_kb=128
|
||||
else
|
||||
ra_kb=512
|
||||
fi
|
||||
if [ -f /sys/block/mmcblk0/bdi/read_ahead_kb ]; then
|
||||
echo $ra_kb > /sys/block/mmcblk0/bdi/read_ahead_kb
|
||||
fi
|
||||
if [ -f /sys/block/mmcblk0rpmb/bdi/read_ahead_kb ]; then
|
||||
echo $ra_kb > /sys/block/mmcblk0rpmb/bdi/read_ahead_kb
|
||||
fi
|
||||
for dm in $dmpts; do
|
||||
echo $ra_kb > $dm
|
||||
done
|
||||
}
|
||||
|
||||
function configure_memory_parameters() {
|
||||
# Set Memory parameters.
|
||||
|
||||
# Set swappiness to 100 for all targets
|
||||
echo 100 > /proc/sys/vm/swappiness
|
||||
|
||||
# Disable wsf for all targets beacause we are using efk.
|
||||
# wsf Range : 1..1000 So set to bare minimum value 1.
|
||||
echo 1 > /proc/sys/vm/watermark_scale_factor
|
||||
configure_zram_parameters
|
||||
configure_read_ahead_kb_values
|
||||
|
||||
#Spawn 1 kswapd threads which can help in fast reclaiming of pages
|
||||
echo 1 > /proc/sys/vm/kswapd_threads
|
||||
}
|
||||
|
||||
# Core control parameters for silver
|
||||
echo 0 0 0 0 1 1 > /sys/devices/system/cpu/cpu0/core_ctl/not_preferred
|
||||
echo 4 > /sys/devices/system/cpu/cpu0/core_ctl/min_cpus
|
||||
echo 60 > /sys/devices/system/cpu/cpu0/core_ctl/busy_up_thres
|
||||
echo 40 > /sys/devices/system/cpu/cpu0/core_ctl/busy_down_thres
|
||||
echo 100 > /sys/devices/system/cpu/cpu0/core_ctl/offline_delay_ms
|
||||
echo 8 > /sys/devices/system/cpu/cpu0/core_ctl/task_thres
|
||||
|
||||
# Enable Core control for Silver
|
||||
echo 1 > /sys/devices/system/cpu/cpu0/core_ctl/enable
|
||||
|
||||
# Disable Core control on gold
|
||||
echo 0 > /sys/devices/system/cpu/cpu6/core_ctl/enable
|
||||
|
||||
# Setting b.L scheduler parameters
|
||||
echo 65 > /proc/sys/kernel/sched_downmigrate
|
||||
echo 71 > /proc/sys/kernel/sched_upmigrate
|
||||
echo 85 > /proc/sys/kernel/sched_group_downmigrate
|
||||
echo 100 > /proc/sys/kernel/sched_group_upmigrate
|
||||
echo 1 > /proc/sys/kernel/sched_walt_rotate_big_tasks
|
||||
echo 0 > /proc/sys/kernel/sched_coloc_busy_hysteresis_enable_cpus
|
||||
echo 0 > /proc/sys/kernel/sched_busy_hysteresis_enable_cpus
|
||||
echo 5 > /proc/sys/kernel/sched_ravg_window_nr_ticks
|
||||
|
||||
# disable unfiltering
|
||||
echo 20000000 > /proc/sys/kernel/sched_task_unfilter_period
|
||||
|
||||
# cpuset parameters
|
||||
echo 0-5 > /dev/cpuset/background/cpus
|
||||
echo 0-5 > /dev/cpuset/system-background/cpus
|
||||
|
||||
# Turn off scheduler boost at the end
|
||||
echo 0 > /proc/sys/kernel/sched_boost
|
||||
|
||||
# configure governor settings for silver cluster
|
||||
echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/down_rate_limit_us
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/up_rate_limit_us
|
||||
echo 1113600 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/hispeed_freq
|
||||
echo 576000 > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq
|
||||
|
||||
# configure governor settings for gold cluster
|
||||
echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy6/scaling_governor
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy6/schedutil/down_rate_limit_us
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy6/schedutil/up_rate_limit_us
|
||||
echo 1228800 > /sys/devices/system/cpu/cpufreq/policy6/schedutil/hispeed_freq
|
||||
echo 691200 > /sys/devices/system/cpu/cpufreq/policy6/scaling_min_freq
|
||||
|
||||
# Colocation V3 settings
|
||||
echo 680000 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/rtg_boost_freq
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy6/schedutil/rtg_boost_freq
|
||||
echo 51 > /proc/sys/kernel/sched_min_task_util_for_boost
|
||||
echo 35 > /proc/sys/kernel/sched_min_task_util_for_colocation
|
||||
|
||||
# sched_load_boost as -6 is equivalent to target load as 85. It is per cpu tunable.
|
||||
echo -6 > /sys/devices/system/cpu/cpu6/sched_load_boost
|
||||
echo -6 > /sys/devices/system/cpu/cpu7/sched_load_boost
|
||||
echo 85 > /sys/devices/system/cpu/cpufreq/policy6/schedutil/hispeed_load
|
||||
|
||||
# configure input boost settings
|
||||
echo "0:1113600" > /sys/devices/system/cpu/cpu_boost/input_boost_freq
|
||||
echo 120 > /sys/devices/system/cpu/cpu_boost/input_boost_ms
|
||||
|
||||
# Enable bus-dcvs
|
||||
for device in /sys/devices/platform/soc
|
||||
do
|
||||
for cpubw in $device/*cpu-cpu-ddr-bw/devfreq/*cpu-cpu-ddr-bw
|
||||
do
|
||||
cat $cpubw/available_frequencies | cut -d " " -f 1 > $cpubw/min_freq
|
||||
echo "bw_hwmon" > $cpubw/governor
|
||||
echo "762 1144 1720 2086 2597 2929 3879 5161 5931 6881 7980" > $cpubw/bw_hwmon/mbps_zones
|
||||
echo 4 > $cpubw/bw_hwmon/sample_ms
|
||||
echo 68 > $cpubw/bw_hwmon/io_percent
|
||||
echo 20 > $cpubw/bw_hwmon/hist_memory
|
||||
echo 0 > $cpubw/bw_hwmon/hyst_length
|
||||
echo 80 > $cpubw/bw_hwmon/down_thres
|
||||
echo 0 > $cpubw/bw_hwmon/guard_band_mbps
|
||||
echo 250 > $cpubw/bw_hwmon/up_scale
|
||||
echo 1600 > $cpubw/bw_hwmon/idle_mbps
|
||||
echo 40 > $cpubw/polling_interval
|
||||
done
|
||||
|
||||
# configure compute settings for silver latfloor
|
||||
for latfloor in $device/*cpu0-cpu*latfloor/devfreq/*cpu0-cpu*latfloor
|
||||
do
|
||||
cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
|
||||
echo 8 > $latfloor/polling_interval
|
||||
done
|
||||
|
||||
# configure compute settings for gold latfloor
|
||||
for latfloor in $device/*cpu6-cpu*latfloor/devfreq/*cpu6-cpu*latfloor
|
||||
do
|
||||
cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
|
||||
echo 8 > $latfloor/polling_interval
|
||||
done
|
||||
|
||||
# configure mem_latency settings for DDR scaling
|
||||
for memlat in $device/*lat/devfreq/*lat
|
||||
do
|
||||
cat $memlat/available_frequencies | cut -d " " -f 1 > $memlat/min_freq
|
||||
echo 8 > $memlat/polling_interval
|
||||
echo 400 > $memlat/mem_latency/ratio_ceil
|
||||
done
|
||||
|
||||
#Gold CPU6 L3 ratio ceil
|
||||
for l3gold in $device/*cpu6-cpu-l3-lat/devfreq/*cpu6-cpu-l3-lat
|
||||
do
|
||||
echo 4000 > $l3gold/mem_latency/ratio_ceil
|
||||
echo 25000 > $l3gold/mem_latency/wb_filter_ratio
|
||||
echo 60 > $l3gold/mem_latency/wb_pct_thres
|
||||
done
|
||||
|
||||
#Gold CPU7 L3 ratio ceil
|
||||
for l3gold in $device/*cpu7-cpu-l3-lat/devfreq/*cpu7-cpu-l3-lat
|
||||
do
|
||||
echo 4000 > $l3gold/mem_latency/ratio_ceil
|
||||
echo 25000 > $l3gold/mem_latency/wb_filter_ratio
|
||||
echo 60 > $l3gold/mem_latency/wb_pct_thres
|
||||
done
|
||||
|
||||
done
|
||||
|
||||
echo N > /sys/module/lpm_levels/parameters/sleep_disabled
|
||||
|
||||
configure_memory_parameters
|
||||
|
||||
setprop vendor.post_boot.parsed 1
|
||||
246
proprietary/vendor/bin/init.kernel.post_boot-holi.sh
vendored
246
proprietary/vendor/bin/init.kernel.post_boot-holi.sh
vendored
@@ -1,246 +0,0 @@
|
||||
#=============================================================================
|
||||
# Copyright (c) 2020-2021 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2012-2013, 2016-2020, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are
|
||||
# met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above
|
||||
# copyright notice, this list of conditions and the following
|
||||
# disclaimer in the documentation and/or other materials provided
|
||||
# with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor the names of its
|
||||
# contributors may be used to endorse or promote products derived
|
||||
# from this software without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
|
||||
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
||||
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#=============================================================================
|
||||
|
||||
function configure_zram_parameters() {
|
||||
# Moto yangbq2: Skip this if we are using zram from fstab.
|
||||
using_zram_from_fstab=`getprop ro.vendor.zram.swapon`
|
||||
if [ "$using_zram_from_fstab" == "true" ]; then
|
||||
return
|
||||
fi
|
||||
MemTotalStr=`cat /proc/meminfo | grep MemTotal`
|
||||
MemTotal=${MemTotalStr:16:8}
|
||||
|
||||
# Zram disk - 75% for < 2GB devices .
|
||||
# For >2GB devices, size = 50% of RAM size. Limit the size to 4GB.
|
||||
|
||||
let RamSizeGB="( $MemTotal / 1048576 ) + 1"
|
||||
diskSizeUnit=M
|
||||
if [ $RamSizeGB -le 2 ]; then
|
||||
let zRamSizeMB="( $RamSizeGB * 1024 ) * 3 / 4"
|
||||
else
|
||||
let zRamSizeMB="( $RamSizeGB * 1024 ) / 2"
|
||||
fi
|
||||
|
||||
# use MB avoid 32 bit overflow
|
||||
if [ $zRamSizeMB -gt 4096 ]; then
|
||||
let zRamSizeMB=4096
|
||||
fi
|
||||
|
||||
if [ -f /sys/block/zram0/disksize ]; then
|
||||
if [ -f /sys/block/zram0/use_dedup ]; then
|
||||
echo 1 > /sys/block/zram0/use_dedup
|
||||
fi
|
||||
echo "$zRamSizeMB""$diskSizeUnit" > /sys/block/zram0/disksize
|
||||
|
||||
# ZRAM may use more memory than it saves if SLAB_STORE_USER
|
||||
# debug option is enabled.
|
||||
if [ -e /sys/kernel/slab/zs_handle ]; then
|
||||
echo 0 > /sys/kernel/slab/zs_handle/store_user
|
||||
fi
|
||||
if [ -e /sys/kernel/slab/zspage ]; then
|
||||
echo 0 > /sys/kernel/slab/zspage/store_user
|
||||
fi
|
||||
|
||||
mkswap /dev/block/zram0
|
||||
swapon /dev/block/zram0 -p 32758
|
||||
fi
|
||||
}
|
||||
|
||||
function configure_read_ahead_kb_values() {
|
||||
MemTotalStr=`cat /proc/meminfo | grep MemTotal`
|
||||
MemTotal=${MemTotalStr:16:8}
|
||||
|
||||
dmpts=$(ls /sys/block/*/queue/read_ahead_kb | grep -e dm -e mmc)
|
||||
|
||||
# Set 128 for <= 3GB &
|
||||
# set 512 for >= 4GB targets.
|
||||
if [ $MemTotal -le 3145728 ]; then
|
||||
ra_kb=128
|
||||
else
|
||||
ra_kb=512
|
||||
fi
|
||||
if [ -f /sys/block/mmcblk0/bdi/read_ahead_kb ]; then
|
||||
echo $ra_kb > /sys/block/mmcblk0/bdi/read_ahead_kb
|
||||
fi
|
||||
if [ -f /sys/block/mmcblk0rpmb/bdi/read_ahead_kb ]; then
|
||||
echo $ra_kb > /sys/block/mmcblk0rpmb/bdi/read_ahead_kb
|
||||
fi
|
||||
for dm in $dmpts; do
|
||||
echo $ra_kb > $dm
|
||||
done
|
||||
}
|
||||
|
||||
function configure_memory_parameters() {
|
||||
# Set Memory parameters.
|
||||
|
||||
# Set swappiness to 100 for all targets
|
||||
echo 100 > /proc/sys/vm/swappiness
|
||||
|
||||
# Disable wsf for all targets beacause we are using efk.
|
||||
# wsf Range : 1..1000 So set to bare minimum value 1.
|
||||
echo 1 > /proc/sys/vm/watermark_scale_factor
|
||||
configure_zram_parameters
|
||||
configure_read_ahead_kb_values
|
||||
|
||||
#Spawn 2 kswapd threads which can help in fast reclaiming of pages
|
||||
#use 1 to improve performance
|
||||
echo 1 > /proc/sys/vm/kswapd_threads
|
||||
}
|
||||
|
||||
# Core control parameters for silver
|
||||
echo 0 0 0 0 1 1 > /sys/devices/system/cpu/cpu0/core_ctl/not_preferred
|
||||
echo 4 > /sys/devices/system/cpu/cpu0/core_ctl/min_cpus
|
||||
echo 60 > /sys/devices/system/cpu/cpu0/core_ctl/busy_up_thres
|
||||
echo 40 > /sys/devices/system/cpu/cpu0/core_ctl/busy_down_thres
|
||||
echo 100 > /sys/devices/system/cpu/cpu0/core_ctl/offline_delay_ms
|
||||
echo 8 > /sys/devices/system/cpu/cpu0/core_ctl/task_thres
|
||||
|
||||
# Enable Core control for Silver
|
||||
echo 1 > /sys/devices/system/cpu/cpu0/core_ctl/enable
|
||||
|
||||
# Disable Core control on gold
|
||||
echo 0 > /sys/devices/system/cpu/cpu6/core_ctl/enable
|
||||
|
||||
# Setting b.L scheduler parameters
|
||||
echo 65 > /proc/sys/kernel/sched_downmigrate
|
||||
echo 71 > /proc/sys/kernel/sched_upmigrate
|
||||
echo 85 > /proc/sys/kernel/sched_group_downmigrate
|
||||
echo 100 > /proc/sys/kernel/sched_group_upmigrate
|
||||
echo 1 > /proc/sys/kernel/sched_walt_rotate_big_tasks
|
||||
echo 0 > /proc/sys/kernel/sched_coloc_busy_hysteresis_enable_cpus
|
||||
echo 0 > /proc/sys/kernel/sched_busy_hysteresis_enable_cpus
|
||||
echo 5 > /proc/sys/kernel/sched_ravg_window_nr_ticks
|
||||
|
||||
# disable unfiltering
|
||||
echo 20000000 > /proc/sys/kernel/sched_task_unfilter_period
|
||||
|
||||
# cpuset parameters
|
||||
echo 0-3 > /dev/cpuset/background/cpus
|
||||
echo 0-5 > /dev/cpuset/system-background/cpus
|
||||
|
||||
# Turn off scheduler boost at the end
|
||||
echo 0 > /proc/sys/kernel/sched_boost
|
||||
|
||||
# configure governor settings for silver cluster
|
||||
echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/down_rate_limit_us
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/up_rate_limit_us
|
||||
echo 1190400 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/hispeed_freq
|
||||
echo 576000 > /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq
|
||||
|
||||
# configure governor settings for gold cluster
|
||||
echo "schedutil" > /sys/devices/system/cpu/cpufreq/policy6/scaling_governor
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy6/schedutil/down_rate_limit_us
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy6/schedutil/up_rate_limit_us
|
||||
echo 1248000 > /sys/devices/system/cpu/cpufreq/policy6/schedutil/hispeed_freq
|
||||
echo 768000 > /sys/devices/system/cpu/cpufreq/policy6/scaling_min_freq
|
||||
|
||||
# Colocation V3 settings
|
||||
echo 680000 > /sys/devices/system/cpu/cpufreq/policy0/schedutil/rtg_boost_freq
|
||||
echo 0 > /sys/devices/system/cpu/cpufreq/policy6/schedutil/rtg_boost_freq
|
||||
echo 51 > /proc/sys/kernel/sched_min_task_util_for_boost
|
||||
echo 35 > /proc/sys/kernel/sched_min_task_util_for_colocation
|
||||
|
||||
# sched_load_boost as -6 is equivalent to target load as 85. It is per cpu tunable.
|
||||
echo -6 > /sys/devices/system/cpu/cpu6/sched_load_boost
|
||||
echo -6 > /sys/devices/system/cpu/cpu7/sched_load_boost
|
||||
echo 85 > /sys/devices/system/cpu/cpufreq/policy6/schedutil/hispeed_load
|
||||
|
||||
# configure input boost settings
|
||||
echo "0:1190400" > /sys/devices/system/cpu/cpu_boost/input_boost_freq
|
||||
echo 120 > /sys/devices/system/cpu/cpu_boost/input_boost_ms
|
||||
|
||||
# Enable bus-dcvs
|
||||
for device in /sys/devices/platform/soc
|
||||
do
|
||||
for cpubw in $device/*cpu-cpu-ddr-bw/devfreq/*cpu-cpu-ddr-bw
|
||||
do
|
||||
cat $cpubw/available_frequencies | cut -d " " -f 1 > $cpubw/min_freq
|
||||
echo "bw_hwmon" > $cpubw/governor
|
||||
echo "1144 1720 2086 2929 3879 5931 6881 8137" > $cpubw/bw_hwmon/mbps_zones
|
||||
echo 4 > $cpubw/bw_hwmon/sample_ms
|
||||
echo 68 > $cpubw/bw_hwmon/io_percent
|
||||
echo 20 > $cpubw/bw_hwmon/hist_memory
|
||||
echo 0 > $cpubw/bw_hwmon/hyst_length
|
||||
echo 80 > $cpubw/bw_hwmon/down_thres
|
||||
echo 0 > $cpubw/bw_hwmon/guard_band_mbps
|
||||
echo 250 > $cpubw/bw_hwmon/up_scale
|
||||
echo 1600 > $cpubw/bw_hwmon/idle_mbps
|
||||
echo 40 > $cpubw/polling_interval
|
||||
done
|
||||
|
||||
# configure compute settings for silver latfloor
|
||||
for latfloor in $device/*cpu0-cpu*latfloor/devfreq/*cpu0-cpu*latfloor
|
||||
do
|
||||
cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
|
||||
echo 8 > $latfloor/polling_interval
|
||||
done
|
||||
|
||||
# configure compute settings for gold latfloor
|
||||
for latfloor in $device/*cpu6-cpu*latfloor/devfreq/*cpu6-cpu*latfloor
|
||||
do
|
||||
cat $latfloor/available_frequencies | cut -d " " -f 1 > $latfloor/min_freq
|
||||
echo 8 > $latfloor/polling_interval
|
||||
done
|
||||
|
||||
# configure mem_latency settings for DDR scaling
|
||||
for memlat in $device/*lat/devfreq/*lat
|
||||
do
|
||||
cat $memlat/available_frequencies | cut -d " " -f 1 > $memlat/min_freq
|
||||
echo 8 > $memlat/polling_interval
|
||||
echo 400 > $memlat/mem_latency/ratio_ceil
|
||||
done
|
||||
|
||||
#Gold CPU6 L3 ratio ceil
|
||||
for l3gold in $device/*cpu6-cpu-l3-lat/devfreq/*cpu6-cpu-l3-lat
|
||||
do
|
||||
echo 4000 > $l3gold/mem_latency/ratio_ceil
|
||||
echo 25000 > $l3gold/mem_latency/wb_filter_ratio
|
||||
echo 60 > $l3gold/mem_latency/wb_pct_thres
|
||||
done
|
||||
|
||||
#Gold CPU7 L3 ratio ceil
|
||||
for l3gold in $device/*cpu7-cpu-l3-lat/devfreq/*cpu7-cpu-l3-lat
|
||||
do
|
||||
echo 4000 > $l3gold/mem_latency/ratio_ceil
|
||||
echo 25000 > $l3gold/mem_latency/wb_filter_ratio
|
||||
echo 60 > $l3gold/mem_latency/wb_pct_thres
|
||||
done
|
||||
|
||||
done
|
||||
|
||||
echo N > /sys/module/lpm_levels/parameters/sleep_disabled
|
||||
|
||||
configure_memory_parameters
|
||||
|
||||
setprop vendor.post_boot.parsed 1
|
||||
49
proprietary/vendor/bin/init.kernel.post_boot.sh
vendored
49
proprietary/vendor/bin/init.kernel.post_boot.sh
vendored
@@ -1,49 +0,0 @@
|
||||
#=============================================================================
|
||||
# Copyright (c) 2020-2021 Qualcomm Technologies, Inc.
|
||||
# All Rights Reserved.
|
||||
# Confidential and Proprietary - Qualcomm Technologies, Inc.
|
||||
#
|
||||
# Copyright (c) 2012-2013, 2016-2020, The Linux Foundation. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions are
|
||||
# met:
|
||||
# * Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# * Redistributions in binary form must reproduce the above
|
||||
# copyright notice, this list of conditions and the following
|
||||
# disclaimer in the documentation and/or other materials provided
|
||||
# with the distribution.
|
||||
# * Neither the name of The Linux Foundation nor the names of its
|
||||
# contributors may be used to endorse or promote products derived
|
||||
# from this software without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
||||
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
|
||||
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
||||
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||||
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||||
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
||||
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
||||
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
||||
# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
|
||||
# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
#=============================================================================
|
||||
|
||||
if [ -f /sys/devices/soc0/chip_family ]; then
|
||||
chipfamily=`cat /sys/devices/soc0/chip_family`
|
||||
fi
|
||||
|
||||
case "$chipfamily" in
|
||||
"0x73")
|
||||
/vendor/bin/sh /vendor/bin/init.kernel.post_boot-holi.sh
|
||||
;;
|
||||
|
||||
"0x7c")
|
||||
/vendor/bin/sh /vendor/bin/init.kernel.post_boot-blair.sh
|
||||
;;
|
||||
*)
|
||||
echo "***WARNING***: Invalid chip family\n\t No postboot settings applied!!\n"
|
||||
;;
|
||||
esac
|
||||
Reference in New Issue
Block a user